LoRaWAN Indoor Environment and Room Monitoring Sensors
Indoor air quality
TX CO2 T&H AMB
600-053 · EU868
Occupancy and environment monitoring
TX LIGHT PIR T&H
600-062 · EU868
Best suited for
Indoor air quality and CO₂ monitoring in offices, classrooms, meeting rooms and commercial spaces
Monitoring occupancy, light status and environmental conditions in offices, meeting rooms and common areas
Measured values
CO₂ + temperature + relative humidity
Occupancy / motion + day / night + temperature + relative humidity
CO₂ measurement
0…5,000 ppm
±50 ppm
±50 ppm
—
PIR occupancy detection
—
100° horizontal / 100° vertical
Max. 8 m
Max. 8 m
Light detection
—
Day / night detection
Temperature measurement
−40…+125 °C
±0.2 °C
±0.2 °C
−40…+125 °C
±0.2 °C
±0.2 °C
Relative humidity measurement
0…100 %RH
±2 %RH
±2 %RH
0…100 %RH
±2 %RH
±2 %RH
Protection rating
IP40
IP40
Battery / power supply
3.6 V C-type lithium battery
or
USB-C external power supply
or
USB-C external power supply
3.6 V C-type lithium battery
or
USB-C external power supply
or
USB-C external power supply
Estimated Battery Life
ABC
ABC
Dimensions
77 × 77 × 30 mm
77 × 77 × 30 mm
Communication
LoRaWAN Class A
LoRa Easy
EU868
LoRa Easy
EU868
LoRaWAN Class A
LoRa Easy
EU868
LoRa Easy
EU868
Additional features
LED CO₂ level indicator
Built-in accelerometer for tamper detection
Built-in accelerometer for tamper detection
PIR motion detection
Day / night detection
Built-in accelerometer for tamper detection
Day / night detection
Built-in accelerometer for tamper detection
Note: Battery life may vary depending on the selected data transmission interval, LoRaWAN network conditions, sensor usage intensity and environmental conditions.
LORAWAN INFRASTRUCTURE
Gateway and Receiver Options
To transfer Enless sensor data to BMS, PLC or higher-level software platforms, you can select the receiver or LoRaWAN gateway model that best suits your project architecture.
LoRa Easy Accessory
RX REPEATER
600-301 · EU868
Used to increase the radio communication range between LoRa Easy sensors and the receiver. In applications where the signal is weak, it is installed between the sensors and receiver and retransmits the received LoRa Easy messages to extend the coverage area.
Plug & Play
No configuration required
LoRa Easy compatible
7.5–24 VDC power supply
Download Datasheet LoRaWAN Gateway
NEXT GENERATION
RX LORAWAN
500-602
Up to 500 LoRaWAN devices
Modbus TCP / RTU
BACnet IP / MS/TP
Enless + third-party LoRaWAN sensors
Coming soon: MQTT and REST
Note: LoRa Easy receiver models are designed for the Enless sensor infrastructure. The RX REPEATER is used solely to extend the communication range of LoRa Easy networks and requires no configuration. The next-generation LoRaWAN Gateway also supports the integration of compatible third-party LoRaWAN devices in addition to Enless products.
Now you can download the following software suitable for you. After clicking the button, the download link of the software will be sent to your e-mail address.