Home Products Blog Contact Catalog Company 0216 364 02 10
LoRaWAN Door and Window Open/Close Sensor - lorawan-door-open-close-sensor.webp

LoRaWAN Door and Window Open/Close Sensor

 

What Is a LoRaWAN Door and Window Sensor?

A LoRaWAN sensor used to wirelessly monitor whether doors and windows are open or closed. Thanks to its magnet-based contactless detection system, the TX WINDOW detects status changes and transmits the information to the monitoring system via LoRaWAN or LoRa Easy infrastructure. It enables remote monitoring of door and window status in building automation, energy management and room occupancy control applications.

 
Open / Close Detection
Enless TX WINDOW
TX WINDOW
600-065 · EU868
Best suited for
Remote monitoring of the open / closed status of doors and windows; building automation, energy management and room control applications
Detected status
Open / Closed
Detection method
Magnet + Hall effect contactless detection
Status change
Immediate message transmission when the open / closed status changes
Communication
LoRaWAN Class A
LoRa Easy
EU868
RF output power
25 mW / 14 dBm
Protection rating
IP40
Operating temperature
−20…+55 °C
Mounting
Surface mounting using screws or 3M adhesive
Battery / power supply
3.6 V 2/3 AA lithium battery
Replaceable
Estimated Battery Life
ABC
Dimensions
30 × 95 × 21 mm
PDF Datasheet
Note: Battery life may vary depending on LoRaWAN network conditions, communication settings, door / window usage frequency and environmental conditions.
LORAWAN INFRASTRUCTURE
Gateway and Receiver Options
To transfer Enless sensor data to BMS, PLC or higher-level software platforms, you can select the receiver or LoRaWAN gateway model that best suits your project architecture.
LoRa Easy Receiver
Enless RX MODBUS
RX MODBUS
500-302
Up to 50 sensors
Modbus TCP/IP
Modbus RTU
LoRa Easy Receiver
Enless RX BACNET
RX BACNET
500-312
Up to 50 sensors
BACnet IP
BACnet MS/TP
LoRa Easy Receiver
Enless RX HTTP
RX HTTP
500-322
Up to 50 sensors
HTTP POST
JSON data transfer
Enless RX REPEATER 600-301
LoRa Easy Accessory
RX REPEATER
600-301 · EU868
Used to increase the radio communication range between LoRa Easy sensors and the receiver. In applications where the signal is weak, it is installed between the sensors and receiver and retransmits the received LoRa Easy messages to extend the coverage area.
Plug & Play
No configuration required
LoRa Easy compatible
7.5–24 VDC power supply
Download Datasheet
LoRaWAN Gateway
NEXT GENERATION
Enless LoRaWAN Gateway
RX LORAWAN
500-602
Up to 500 LoRaWAN devices
Modbus TCP / RTU
BACnet IP / MS/TP
Enless + third-party LoRaWAN sensors
Coming soon: MQTT and REST
Note: LoRa Easy receiver models are designed for the Enless sensor infrastructure. The RX REPEATER is used solely to extend the communication range of LoRa Easy networks and requires no configuration. The next-generation LoRaWAN Gateway also supports the integration of compatible third-party LoRaWAN devices in addition to Enless products.

lorawan-nem-sensor-katalog-2.jpg
Download
Demo software downloads will be activated by filling out the form.
Now you can download the following software suitable for you. After clicking the button, the download link of the software will be sent to your e-mail address.
WhatsApp
×
Demo of this product is available.

You can download the free demo to try this product. To access the download form click.