LoRaWAN 4-Channel Pulse Counter
4-Channel Pulse / Digital Input and 1-Channel DO
CI200-LW
LoRaWAN · EU868
Ordering Options
CI200-LW.EU.0.4.1.1
Internal antenna
Battery not included
Battery not included
CI200-LW.EU.0.4.1.1
Internal antenna
Battery included
Battery included
CI200-LW.EU.1.4.1.1
Internal + external antenna
Battery not included
Battery not included
CI200-LW.EU.1.4.1.1
Internal + external antenna
Battery included
Battery included
Best suited for
Remote reading of water, gas, electricity and similar pulse-output meters via LoRaWAN; monitoring of digital status and alarm signals
Pulse / Digital Input
4 channels
Software-selectable pulse counting or digital status monitoring mode
Software-selectable pulse counting or digital status monitoring mode
Supported signals
Dry contact and open collector
Max. pulse frequency
100 Hz
200 Hz with additional EMI protection
200 Hz with additional EMI protection
Digital output
1 × Open Collector
Max. 1 A · 24 VDC
Max. 1 A · 24 VDC
Communication
LoRaWAN 1.0.4
Class A / Class C
EU868
Class A / Class C
EU868
LoRaWAN activation
ABP / OTAA
Data transmission interval
1 / 5 / 10 / 30 minutes
1 / 4 / 6 / 12 / 24 hours
1 / 4 / 6 / 12 / 24 hours
Internal memory
8 MB Flash
20,000 data packets
20,000 data packets
Configuration
Bluetooth LE 5.1
akYtec IoT Configurator — Android / Windows
akYtec IoT Configurator — Android / Windows
NFC
Device identification and activation via NFC-A
Data security
Hardware-based AES-128 encryption
Antenna options
Internal antenna
Model with internal + external antenna support
Model with internal + external antenna support
Battery / power supply
2 × ER18505 · 3.6 V · total 4,000 mAh
or 5…30 VDC external power supply
or 5…30 VDC external power supply
Estimated Battery Life
Up to 5 years
Protection rating
IP65
Operating temperature
−40…+70 °C
Dimensions
129 × 79 × 29 mm
Connection cable
2 × 1.5 m
PDF Datasheet
Note: Battery life may vary depending on the LoRaWAN data transmission interval, input activity frequency, network conditions and device configuration. When powered by an external DC supply, the device may support LoRaWAN Class C operating mode.
LORAWAN INFRASTRUCTURE
LoRaWAN Gateway
The RX LORAWAN gateway can be used to integrate LoRaWAN sensors, input modules or control devices into building management systems and to centrally monitor / control them over LoRaWAN. The gateway collects data from LoRaWAN nodes and transfers it to BMS or PLC systems via Modbus or BACnet.
LoRaWAN Gateway
RX LORAWAN
500-602 · EU868
500
LoRaWAN node connections
A scalable architecture that allows up to 500 LoRaWAN devices to be managed through a single gateway.
Embedded LoRaWAN Network Server
The LNS is integrated into the gateway, allowing a private LoRaWAN network to be deployed without requiring a separate external network server.
Enless + third-party LoRaWAN
Enless LoRaWAN products are decoded natively. Compatible third-party LoRaWAN devices can also be integrated into the system using JavaScript codecs and JSON mapping.
BMS / HVAC INTEGRATION
From LoRaWAN directly to building automation protocols
Modbus
TCP / RTU
BMS / PLC
BACnet
IP / MS/TP
BMS / HVAC
Power supply: 12–24 V AC/DC or PoE
Mounting: DIN rail or screw mounting
Configuration: Built-in web interface
Protection: IP60
Note: The RX LORAWAN Gateway can be used to integrate Enless Wireless LoRaWAN sensors and compatible third-party LoRaWAN devices into BMS or PLC systems via Modbus and BACnet.