LoRaWAN Humidity and Temperature Sensors

What Are LoRaWAN Humidity and Temperature Sensors?

These low-power sensors wirelessly transmit ambient temperature and relative humidity data to monitoring systems. The Enless TX T&H family meets a wide range of requirements within the same LoRaWAN infrastructure, from compact room monitoring and display-equipped models to long battery life and external-probe solutions for demanding environments.

Models

Compact option

TX T&H MINI

600-050 · EU868

Long battery life

TX T&H AMB

600-051 · EU868

Display option

TX T&H E-INK AMB

600-052 · EU868

External probe

TX T&H EXT

600-034 · EU868

Best suited for

Standard room monitoring; compact and cost-effective installation

Commercial building applications requiring long maintenance intervals

Areas where measurement values need to be viewed locally

Ventilation ducts, technical areas and applications requiring an external probe

Measured values

Temperature + relative humidity

Sensor configuration

Internal

2 m external probe

Display

—

2.13-inch E-Ink

—

Measurement range

−20…+55 °C
0…100 %RH (typical)

−20…+100 °C
0…100 %RH (typical)

Typical accuracy

±0.2 °C
±2 %RH

±0.5 °C
±2 %RH

Protection rating

IP40

IP65

Battery / power supply

3.6 V
2/3 AA lithium battery

3.6 V C-type lithium battery
or
external power supply with USB-C support

3.6 V
D-type lithium battery

Estimated Battery Life

ABC

Dimensions

30 × 95 × 21 mm

77 × 77 × 30 mm

118 × 79 × 43 mm

Communication

LoRaWAN Class A
LoRa Easy

Additional feature

Compact housing and easy wall mounting

Built-in accelerometer for tamper detection

E-Ink display and built-in accelerometer for tamper detection

IP65 housing and external temperature / humidity probe

PDF Datasheet

Download

Note: Battery life may vary depending on the selected data transmission interval, LoRaWAN network conditions and environmental conditions.

Installation Images

LORAWAN INFRASTRUCTURE

Gateway and Receiver Options

To transfer Enless sensor data to BMS, PLC or higher-level software platforms, you can select the receiver or LoRaWAN gateway model that best suits your project architecture.

LoRa Easy Receiver

RX MODBUS

500-302

Up to 50 sensors

Modbus TCP/IP

Modbus RTU

Download Datasheet

LoRa Easy Receiver

RX BACNET

500-312

Up to 50 sensors

BACnet IP

BACnet MS/TP

Download Datasheet

LoRa Easy Receiver

RX HTTP

500-322

Up to 50 sensors

HTTP POST

JSON data transfer

Download Datasheet

LoRa Easy Accessory

RX REPEATER

600-301 · EU868

Used to increase the radio communication range between LoRa Easy sensors and the receiver. In applications where signal strength is insufficient, it is installed between the sensors and receiver, retransmitting received LoRa Easy messages to extend coverage.

Plug & Play

No configuration required

LoRa Easy compatible

7.5–24 VDC power supply

Download Datasheet

LoRaWAN Gateway

NEXT GENERATION

RX LORAWAN

500-602

Up to 500 LoRaWAN devices

Modbus TCP / RTU

BACnet IP / MS/TP

Enless + third-party LoRaWAN sensors

Coming soon: MQTT and REST

Download Datasheet

Note: LoRa Easy receiver models are designed for the Enless sensor infrastructure. The RX REPEATER is used solely to extend the communication range of LoRa Easy networks and requires no configuration. The next-generation LoRaWAN Gateway additionally supports the integration of compatible third-party LoRaWAN devices alongside Enless products.

Demo software downloads will be activated by filling out the form.

Now you can download the following software suitable for you. After clicking the button, the download link of the software will be sent to your e-mail address.