LoRaWAN Internal and External Temperature Sensors
Internal sensor
TX TEMP INS
600-031 · EU868
Single PT1000 probe
TX TEMP CONT1
600-032 · EU868
Dual PT1000 probe
TX TEMP CONT2
600-232 · EU868
Best suited for
General temperature monitoring in industrial environments and technical areas
Single-point temperature measurement on pipes, surfaces and equipment
Simultaneous monitoring of two different temperature points using a single device
Measured value
Temperature
Temperature
2 × temperature
Sensor configuration
Internal temperature sensor
1 × external PT1000 contact probe
2 × external PT1000 contact probes
Temperature measurement range
−40…+125 °C
Depends on PT1000 probe configuration
Depends on PT1000 probe configuration
Temperature accuracy
±0.2 °C
Depends on PT1000 probe specifications
Depends on PT1000 probe specifications
Protection rating
IP65
IP65
IP65
Mounting
Wall / clamp / DIN rail
Wall mounting
Wall mounting
Device operating temperature
−20…+55 °C
−20…+55 °C
−20…+55 °C
Battery / power supply
3.6 V D-type lithium battery
Replaceable
Replaceable
3.6 V D-type lithium battery
Replaceable
Replaceable
3.6 V D-type lithium battery
Replaceable
Replaceable
Estimated Battery Life
ABC
ABC
ABC
Dimensions
118 × 79 × 43 mm
118 × 79 × 43 mm
118 × 79 × 43 mm
Communication
LoRaWAN Class A
LoRa Easy
EU868
LoRa Easy
EU868
LoRaWAN Class A
LoRa Easy
EU868
LoRa Easy
EU868
LoRaWAN Class A
LoRa Easy
EU868
LoRa Easy
EU868
Additional features
Internal measurement
Housing suitable for industrial and outdoor applications
Housing suitable for industrial and outdoor applications
Single external PT1000 contact probe
Simultaneous two-point measurement with two external PT1000 probes
Note: Battery life may vary depending on the selected data transmission interval, LoRaWAN network conditions and environmental conditions.
LORAWAN INFRASTRUCTURE
Gateway and Receiver Options
To transfer Enless sensor data to BMS, PLC or higher-level software platforms, you can select the receiver or LoRaWAN gateway model that best suits your project architecture.
LoRa Easy Accessory
RX REPEATER
600-301 · EU868
Used to increase the radio communication range between LoRa Easy sensors and the receiver. In applications where the signal is weak, it is installed between the sensors and receiver and retransmits the received LoRa Easy messages to extend the coverage area.
Plug & Play
No configuration required
LoRa Easy compatible
7.5–24 VDC power supply
Download Datasheet LoRaWAN Gateway
NEXT GENERATION
RX LORAWAN
500-602
Up to 500 LoRaWAN devices
Modbus TCP / RTU
BACnet IP / MS/TP
Enless + third-party LoRaWAN sensors
Coming soon: MQTT and REST
Note: LoRa Easy receiver models are designed for the Enless sensor infrastructure. The RX REPEATER is used solely to extend the communication range of LoRa Easy networks and requires no configuration. The next-generation LoRaWAN Gateway also supports the integration of compatible third-party LoRaWAN devices in addition to Enless products.
Now you can download the following software suitable for you. After clicking the button, the download link of the software will be sent to your e-mail address.